Supplied in 3 metre lengths.
Minimum order quantity of 12 metres.
| Height (All 6mm Thick) | Includes Stakes | Includes all Fixings | Price Per Metre Ex. Vat |
|---|---|---|---|
| 75mm | 40cm long, every 75cm | Joining plate and 4 nuts | £19.50 |
| 100mm | 40cm long, every 75cm | Joining plate and 4 nuts | £21.00 |
| 150mm | 45cm long, every 75cm | Joining plate and 6 nuts | £25.50 |
| 200mm | 45cm long, every 75cm | Joining plate and 6 nuts | £32.50 |
| 300mm | 50cm long, every 75cm | Joining plate and 6 nuts | £45.00 |
| Delivery on whole order | All order sizes £65.00 |
Supplied in minimum 2 metre lengths.
Minimum order quantity of 12 metres.
| Height (All 3mm Thick) | Includes Stakes | Includes all Fixings | Price Per Metre Ex. Vat |
|---|---|---|---|
| 75mm | 40cm long, every 75cm | Joining plate and 4 nuts | £16.50 |
| 100mm | 40cm long, every 75cm | Joining plate and 4 nuts | £17.50 |
| 150mm | 45cm long, every 75cm | Joining plate and 6 nuts | £19.00 |
| Delivery on whole order | All order sizes £65.00 |
These may be required for some projects.
| Accessories | Description | Price per Metre Ex VAT |
|---|---|---|
| External Corner 75mm to 200mm high | 90 degree bend where the outside (270 degree angle) is on show | £20.00 |
| Internal Corner 75mm to 200mm high | 90 degree bend where the outside (90 degree angle) is on show | £20.00 |
| Corner pieces 300mm high | 90 degree bend where the outside (90 degree angle) is on show | £25.00 |
| Corner piece custom angle | A corner piece custom made to your specified angle | £30.00 |
| Joining kit | Only needed when you cut the edge on site and need to rejoin cut ends | £12.50 |
Our preformed corners are available in both 3mm and 6mm thicknesses and in all heights. It is possible to bend the 3mm edge yourself to produce a rounded corner, however for a crisp angle our preformed corners are recommended. Each corner comes with a joining plate and fixings to attach to the rest of the edge.
Corner pieces measure 5cm / 5cm (plus a joining plate) so provide an additional 10cm of edge in total. Bear this in mind if you require accurate lengths.
It is important to order the correct corner pieces.
If the outside (wide) face is on show choose an external corner. If the inside face (90 degree angle) is on show choose an internal corner. See the photos below, the fixings go on the unseen side.
If you don’t need to rejoin the edge you have cut yourself you won’t need these. These are required if you wish to join ends of our edge which you have cut and so removed the prefixed bolt studs. Or, for example, you have needed to cut an end leading up to one of our corner pieces.
A joining kit comes with a predrilled plate, nuts, bolts and a drill bit.
You will need a drill to make holes for the bolts to go through. While the joing plate is predrilled you can set low on the edge so the bolt heads are not visible.
Simply fill in the same day quote form, email or call us. We will prepare your quote by hand for approval and include payment details.
Price per metre installed. All 6mm thick.
| Height (All 6mm Thick) | First 20 Metres | 20 to 50 Metres | 50 Metres and Over |
|---|---|---|---|
| 75mm | £26.00 | £23.50 | £22.00 |
| 100mm | £29.00 | £27.00 | £25.00 |
| 150mm | £32.50 | £30.50 | £28.50 |
| 200mm | £40.50 | £38.50 | £36.50 |
| 300mm | £54.00 | £50.00 | £48.00 |
Please note the prices are a guide and can vary slightly depending on the location, metreage required and complexity of the installation (curves and angles). The prices assume the site is ready for installation with no or limited clearing necessary.
As a guide we recommend burying half of the edge in the ground when edging driveways and paths. For edging borders, we recommend burying a third of the edge in the ground.
If we are installing edging during the construction of your project it is likely that our edge will be used to retain sub bases or create changes in levels in those cases higher edges are usually required. We are happy to advise.
Feel free to send us photos of the site or plans. Please contact us for a quote or complete the quote enquiry form below.
We are a small business that combines a strong passion for steel with amazing customer service.
As market leaders in bespoke steel edging and fencing, we genuinely believe we offer the best solutions available.
WOVEN STEEL FENCING
OTHER PRODUCTS
