PRICE LISTS FOR WOVEN STEEL AND ALUMINIUM FENCING

For every order we will prepare you a personalised quote. To place an order please complete our same day quote form or feel free to call or email us with your requirements, or with any questions.

PRICE LIST FOR WOVEN STEEL SELF BUILD FENCING KITS

Prices are based on fences with a height of 1 metre or more, please enquire for fences under 5 square metres or less than 1 metre high
FENCE AREA (LENGTH x HEIGHT)TO INCLUDECOST PER M SQ EX VAT
First 5 to 10 m sqPosts cut to length, slats, instructions, fixings and tools£98.00
Next 10 to 20 m sq As above£90.00
Over 30 m sqAs above£85.00
Over 50 m sqAs aboveFree delivery
Over 100 m sqAs abovePlease enquire
If your fence is in more than one section You will need additional end postsPlease enquire

PRICE LIST FOR WOVEN ALUMINIUM SELF BUILD FENCING KITS

Prices are based on fences with a height of 1 metre or more, please enquire for fences under 5 square metres or less than 1 metre high
FENCE AREA (LENGTH x HEIGHT)TO INCLUDECOST PER M SQ EX VAT
First 5 to 10 m sqPosts cut to length, slats, instructions, fixings and tools£130.00
Next 10 to 20 m sq As above£120.00
Over 30 m sqAs above£115.00
Over 50 m sqAs aboveFree delivery
Over 100 m sqAs abovePlease enquire
If your fence is in more than one section You will need additional end postsPlease enquire

Points to consider


You will receive two end posts with each order, this is to serve one section of fence. Additional sections will require two end posts each.

Corner posts are available for a crisp right angle corner, however it is possible to bend the slat around the corner by hand, negating the need for a corner post. If you are unsure please get in touch.

PRICE LIST
SELF FIT WOVEN STEEL FENCE PANELS

CORTEN PANELS

PANEL HEIGHT (150cm WIDE)PRICE PER PANEL EX VAT
90cm (approx 3ft) high£195.00
120cm (approx 4ft) high£225.00
150cm (approx 5ft) high£260.00
180cm (approx 6ft) high£295.00
Delivery (mainland UK) on all orders£65.00

GALVANISED PANELS

PANEL HEIGHT (150cm WIDE)PRICE PER PANEL EX VAT
90cm (approx 3ft) high£245.00
120cm (approx 4ft) high£280.00
150cm (approx 5ft) high£325.00
180cm (approx 6ft) high£415.00
Delivery (mainland UK) on all orders£65.00

POSTS FOR THE PANELS

POSTS (ALL PLAIN MILD STEEL)PRICE EX VAT
150cm (for 90cm high panel)£60.00
180cm (for a 1.2m high panel)£65.00
210cm (for a 1.5m high panel)£75
240cm (for a 1.8m high panel)£80.00
Cut panel kit (required if fitting a cut/reduced panel)£30.00

Points to consider


  • When ordering remember to finish each run of fencing with an end post, so for a single run two end posts are required. To create a 90 degree bend (or any angle) simply use an end post for each section, please tell us when ordering.

  • If you need to reduce the width of a panel you will need a cut panel kit. It is simple to do but requires an angle grinder and drill.

  • A post adds 1cm to a panel width. For example, a fence 10 panels long will measure 15 metres and 11cm. That's 10 x 1.5 metre wide panels, plus 11 x posts adding 1cm. To offer flexibility, the end posts can provide up to 3cm of additional fence length to take the worry out of cutting a panel too short.

  • The posts required are approx 60cm (2ft longer) than the fence height for cementing into the ground.

  • Lead times to delivery are 2-3 weeks on Corten panels and 3-4 weeks on galvanised panels.

    • PRICE LIST
    WOVEN STEEL FENCING INSTALLED BY US

    Please see the pricing below for our woven steel fencing. While these prices are accurate, please contact us for a written quote. Alternatively, fill in the woven fencing quote form and we will get back to you later today.
    AreaTO INCLUDEPrice per square metre ex VAT
    First 5 to 10 square metresSupply and installation£130.00
    Next 10 to 50 square metresSupply and installation£120.00
    50 square metres or moreSupply and installation£100.00
    Additional separate sections, angles and sharp curves (curves with a radius of less than 2m) incur an additional cost as these involve more work cutting, bending and smoothing. Costs for these are as follows.

    Each additional separate fence section, angle or curve of less than 2 metres in diameter = £83.33 ex vat - £100.00 inc vat

    For gates please get in touch with size requirements.

    Prices assume the site is ready for the installation with no clearing or levelling and the site is within 50 miles of King’s Lynn. If you are within 100 miles of us, it is worth getting in touch as we sometimes venture further.

    Alternatively, fill in the woven fencing quote form and we will get back to you today.
    fence norfolk
    fencing installation norfolk
    Award-winning designs and service

    WHY CHOOSE STEELSCAPES?

    We are a small business that combines a strong passion for steel with amazing customer service.

    As market leaders in bespoke steel edging and fencing, we genuinely believe we offer the best solutions available.

    DISCOVER MORE

    TO MAKE IT HAPPEN

    Call us on 01485 524251 (office hours 8.00am - 4.30pm)
    Email info@steelscapes.co.uk
    Fill in the same day quote form
    Contact

    STEEL EDGING

    STEEL GATES

    Contact

    WOVEN STEEL FENCING

    Contact

    PRICES

    ABOUT

    Three Acres
    Brancaster Road
    Docking
    Norfolk
    PE31 8NB

    Instagram Youtube